Game Fishing Lures  |  Components and Tools |  Tools

Round Nose Pliers

Round Nose Pliers Round nose pliers are used for making the open loop for the hook and the closed loop at the head of the lure. Bend the wire back 180 degrees about 30mm from the end and nip together to form the open hook loop. For the closed loop bend the wire 90 degrees to the right then bend this wire anti-clockwise round the pliers so the wire comes across the shaft wire which goes through the lure. Hold the loop with a pair of pliers and wrap the wire around the shaft 3 times and trim off the excess.
Price: 4.99

De-Luxe Wire Forming Tool

De-Luxe Wire Forming Tool The original De-Luxe wire forming tool is no longer produced by the original manufacturer. There are copies availble, however due to the poor manufacturing quality and performance, Spintec have chosen not to supply these! We recommend a pair of round nose pliers to form both the open hook loop and the closed wire twist. Another make of wire former is also available which has an "L" shaped handle however the manufacturer only recommends it for wires up to 0.6mm which is far too thin to for making Flying C's! They break easily and for this reason we don't supply this one either!

Game Fishing Lures  |  Components and Tools |  Tools


Contact Spintec

Dear Game Fisherman,
We are situated in Ribchester, Lancashire. You are welcome to visit our manufacturing unit and shop (Monday to Friday).

Click here for directions. We are near the banks of the River Ribble off the A59, just 15 mins from M6 - J31.

Please telephone if you prefer to order directly or if you have any questions. We pride ourselves on our fast and efficient personal service.

The Best Game Fishing Lures

We believe the Spintec Flying C' is the most successful Salmon and Sea Trout lure in the UK. Spintec supply assembled lures or components for you to make to your own requirements. Spintec manufacture the widest range of Flying C' colours and weights on the market.

Site Seal

Game Fishing Products

  • Fully assembled lures Blair Spoon, Devon Minnow, Flying Condom, Flying Bullet Condom, Latex Genie Flying C', Flying Bullet C', Latex fly, Latex shrimp and Rubber Zulu.

  • Fishing lure components Barrel leads, Non-lead weights, Bullet Bodies, Teardrop Beads, Metal beads, Clevis, French Blades, Indiana blades, Swing Blades, Ripple Blades, Latex Flying C' lure spinner bodies, Silicone oil, Stainless Split rings, Stainless wires, Spintec Original Ball bearing swivels, bb swivels, Tools, Treble hooks, Single hooks & Zulu bodies.

  • Fishing lure tools Round nose pliers and split ring pliers.

© Spintec, Unit F, Bee Mill, Preston Rd, Ribchester, Lancashire, England, PR3 3XJ
For all your fishing lure needs, telephone: 01254 820200   email | sitemap | T&C | design